It’s gotten a bit warmer so it’s been fun woodworking in the sun. The fact that I only have about 4 and a half walls makes me want to use a bunch of different woods, textures and patterns to break up the rooms. White pine in the kitchen (left side of the trailer) and cedar on the other. A beam of beautiful sap black walnut as the header. I love the contrast of the walnut heart and sap wood. We cut plained and jointed the cedar slats and stacked them onto the wall. Using PL premium adhesive we glued and finish nailed the pattern. A trim piece and some star head brass screws with washers gives a shotgun shell look. I love how it turned out.
The yellow pine car siding on the left came out awesome. The unfinished part of the wall is the spice rack. We *almost* messed up and sealed the wall up before running the pex plumbing line behind it.
I ended up buying an all wood (no particle board) cabinet with drawers to build my countertop off of. I got the “unfinished oak” cabinet, and since I have access to $1 oak boards it is easy to match what we built to the cabinet.
I decided to use advantech(tm) flooring as my countertop base and flooring of the washing machine and underneath the sink. It is super dense OSB with some sort of epoxy glue that makes it waterproof and extra sturdy. Also, the house got its first dose of snow this weekend. Here is a coloradoesque view from my kitchen sink looking out on the weeping cedar trees from the weight of the snow.
The larger box is where my washer dryer combo will live. Underneath the sink behind the toe kick will be the plumbing line in and to the sink, shower and washing machine.
The shower is primed to be installed. Concrete backer board put up and a hole drilled with pex line running and a brass “shark bite” pex to copper elbow fitting. The plumbing line runs from the wheel well across the back of the cabinet and up the pine wall where the elbow leads to the shower.
Materials gathering is so important. To be completely ready to start/ finish a task and to be stopped because I don’t have the right screws, glue or sawblade is the worst. Even not having the the right saw or enough material, it has gotten extremely frustrating working in a remote area. It has taught me to think 5 steps in advance. It would be best to purchase everything needed to complete the entire house and then begin construction once everything has been acquired, but with limited storage space it would be near impossible.
We planed out some cedar and put an angle on each edge. The slats fit together like a puzzle.
Driving around southern Missouri we found another sawmill this time for hardwoods dealing with mostly pallets and flooring. I snagged some boards for $1 each.
Above is my bedroom loft before the beam and below is after. We planed the hardwood boards and cut them down to the 3″ thickness of the panel. We sandwiched the beam between two other pieces of wood and drilled / screwed and glued them together. Instead of staining the wood I decided to bring out the natural grains with a conditioning wood wax oil product. I need to find teak oil to preserve the cedar.
We used the router to cut a small notch on either side of the beam for the wires. It took some work to get them all in the notch, but it looks much cleaner now.
If you ever need lumber I highly recommend going directly to the source. They give away beautiful “scraps” for next to nothing($20 for this whole pile). He said to come back next week and he’ll have thicker pieces too.
I stained the plywood flooring of my closet and put up a backing for any visible holes in the cedar.
Due to mucky weather we brought the saw into the house to cut the cedar and it smells amazing in here now! There is plenty of cedar left for the other loft (:
The windows have all been trimmed on the inside with furring strips. This will give my siding something to nail to.
We found 2×3 boards at a Home Depot on the other side of the state. I think it was worth the drive for the decreased footprint. These frame out the single wall in the house -bathroom to kitchen. I put fire stop boards across in some places. These will be covered with a pretty wood and used as shelving in the bathroom. I used a piece of luann to cover the wall, staining the side visible in the bathroom shelves. The other side I left natural and plan on putting a decorative wood accent wall. This portion of wall will sometimes be covered by the sliding barn door.
We also began the electrical process. I have 6 visible outlets plus 2 hidden for washer/drier and fridge. Both appliances run off 110. My LED lighting runs on 12v.
I still need a breaker box to finish the electrical.
The propane hot water appliance comes in the mail today ($75 off eBay compared to $250 in store- so I got two just in case).
On the way home yesterday I stopped by the American Cedar Mill & Log Homes. I guess he is a one man cedar operation doing amazing work for the past half century. Inquiring about how thin he could slice I realized his scraps were perfect for my siding needs. $20 for a bundle of beautiful fresh cedar siding SOLD. Tomorrow morning back to the mill to rifle through scraps. Woo!
I ordered 10 LED light strips 5 meters each with 300 diodes for $23 from alibaba. I chose soft white but they come in other colors as well. They come on a spool with adhesive already on the back. Every fourth diode has a line where you can cut the strip to the size you want. You can also solder them back together so I’ll have to find a use for all of the scraps.
We have mock wired them with telephone wire and a 12v transformer. This will all look much more professional once replaced with electrical wire and switches, but for now I have lights!
Since my trailer is 8ft wide they are the perfect size to run back and forth on each side of the groove where the roof panels meet.
I am extremely pleased with how well they turned out. Especially being $2 a roll! Gotta love cheap Chinese goods!
The temporary addition of the cardboard door has been extremely beneficial in keeping warm inside. It has been C O L D these past few weeks. (15-35 degrees) We have been using a ceramic space heater and it has been more than enough. I’m reconsidering my need for a propane heater as my appliances and heat from my laptop may be enough to roast me out of there.
Also here are some updates on the first 3 windows. They are trimmed out with charcoal channel and secured with screws.
I am contemplating adding little triangles in each corner to give it a more finished look as pictured below in the top left corner of the window:
Here is the last photo I took on my way out of town for Christmas break
I am a little hesitant to share the mistakes we have made but in order to learn from them I guess I have to own them..? We have been trying to figure the best tool for the job. It is the initial plunge cut thats giving us trouble.
The small 7 1/4′ skilsaw with Diablo steel demon blade is amazing for cutting one side of the panel once it is in there but until the teeth of the blade catches and locks into the groove it has a dangerous kickback. This is where we incurred some minor cosmetic damage. Simple solution in order to cover it up we have moved the window down 3″.
On the first window we cut the plunges with the 7 1/4″ diablo and continued the cut with the 10″ Milwaukee saw and Irwin metal blade. This larger saw cuts all the way to the other side of the panel but is extremely heavy and difficult to maneuver, especially on horizontal cuts.
We even tried the sawzall but the reciprocating back and forth motion is terribly violent, and causes the metal skin to separate from the foam core of the panel.
We took a late night trip to the store after researching oscillating saws. These are apparently somewhat new electric saws. After testing it out it will do the job but very slowly.
We are now looking into using the smaller hand version of the skilsaw but the only charger we have for this tools battery is in Texas at the ranch. We will spend some time hitting pawn shops and hardware stores looking for a new charger and some badass blades that will cut through the metal like butter.
It’s all about finding the proper tool for the job!
The first window is near perfect, but with 6 more windows to go we need to find the easiest, fastest, *safest*, and most precise saw to cut the holes.